NEW Viper Winch Giveaway!! |
| Moderated by: zac41, trailrider2, QUADAHOLIC, OSOKILL, MtnOuty, fmj40 |
|
|||||||||||||||
| Bleeding Coolant System - Can-Am / BRP - ATVs - Can-Am Headquarters ...Aurora Wheelers ATV Forum | ||||||||||||||||
| Author | Post | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||
|
Ntmick Member 
|
Gidday all, Any one found/use a fail safe way of bleeding the cooling systems. I've previously had to do it two or three time in the past. I'm flushing & replacing with distilled water & "water wetter". They are pain to bleed! It's always a long process! 
____________________ Cheers Ntmick '07 650 Outlander Max Green 27" ITP Mudlites 27-9x12 front, 27-12x12 rear Ricochet Skids |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
|
JDUDDING650 Mod 
|
Its extremely easy. There are two bleeder screws/bolts on the back of each black plastic cap on each head. It is where the coolant line crosses between the heads. All you have to do is fill teh machine full of coolant leave the radiator cap off let it idle and get hot and then just loosen each bolt alternating sides until you get no air bubbles and all coolant. Shouldn't take more than 5 minutes.
____________________ 2008 TEAM FAST TWITCH Can-am/LTE GNCC - 4x4 lites Outlander 500 Sponsors--Fast Twitch Energy, LTE Racing Exhuast Can-am,Custom Axis Suspension,Houser,Hiper Wheels, Super Grip Tires,Flexx Bars,Powermadd, Spider Grips, Fly Gear, Epic Graphics, No Toil, Rox Risers |
|||||||||||||||
| ||||||||||||||||
| ||||||||||||||||
|
OSOKILL Admin Assist/ Enforcer 
|
yup another good one for the DIY thread and the canam how to stickies LOL
____________________ Team Outty 800 Member #24 |
|||||||||||||||
| ||||||||||||||||
| Current time is 12:42 pm | |
| Can-Am Headquarters ...Aurora Wheelers ATV Forum > ATVs > Can-Am / BRP > Bleeding Coolant System | |
